READ THIS GUIDE BEFORE INSTALLATION

If you have any questions about your Logo Letters Set or the installation process please contact us BEFORE starting your installation. Installation will take 10 - 20 minutes depending on set size.


Download

| Installation

Letter Set Package includes:

Letters Set
Printed Installation Sheet
Isopropyl Alcohol Wipes

What you will need for your Letter Set  installation:

Hair Dryer
Clean, Lint Free, Soft Cloth
10-20 minutes of time depending on your set size

| Step 1

Thoroughly clean the area where the pieces are to be applied with a clean, lint-free cloth and the alcohol swabs provided or with 3M Solvent 70, to remove ALL residue and dirt.

A test can be performed for cleanliness with ordinary masking tape, if the tape sticks easily to the surface. If not repeat the cleaning process.

| Step 2

Without removing the red backing tape, "dry-fit" ALL pieces, noting correct placement, joins and angles.
Very Important Note:  ALL pieces should be checked "dry-fit" before proceeding to Step 3.
Any refund requests based on fitting issues will be declined once the set or partial pieces are installed. Only replacement and correction requests will be reviewed and accepted.

| Step 3

At the moment of installation, every piece and its installation area should be warm, recommended temperature is between 76F - 80F (24C- 27C). If letters are installed on a cold day, gently heat the letter and its installation place just before applying using hairdryer. Repeat this procedure for each remaining letter. Remember to heat pieces before removing 3M protective tape. Do not overheat! Alternately, on sunny days, laying the kit in the sun for 10-15mins will have the same effect.

| Step 4

Hold the piece by the edges to avoid touching the adhesive surface. Peel Red Protective tape out, place piece in position, align correctly and thoroughly press down on the entire surface of each piece to ensure a complete 'wet-out' of adhesion to the surface. Repeat this step for all pieces you have.
When red backing tape removed  DO NOT TOUCH  3M adhesive surface!

| Step 5

Remove front side clear or white  protective tape from all pieces.

| Step 6

Enjoy our product.

Please do not hesitate to contact us at service@dashkitmall.com with any questions or concerns regarding this particular set or your future purchase. Our Customer Support representatives are always happy to help you.